Not one area was left untouched on the United Dinero v2 forks. A revised steerer tube adding extra strength in key areas to accommodate the ever increasing height of bars and pressure that this puts on the forks, and a new thread for the top cap. Even more improved clearance for 2.4″ tyres, and the main change, a whole new mold for the invest casting dropouts. We moved the dropouts back to the more traditional offset position and by flattening on the inside we have made this sure to work with all front hub and hub guard set ups. A slight change to the outside now means that even the largest diameter plastic pegs will still sit flush in the dropouts with the wheel all the way slammed. Add to this some new logos, simplified colours and a great pair of forks just got even better.
SPECSNew steerer tube with improved strength in key stress areas New M24 threading for top cap further improving strength New improved clearance for 2.4" tyres Complete new mold invest cast dropouts Clearance on inside for all front hub/hub guard set ups Improved fit for up to 44mm OD pegs 100% post weld heat treated seamless 4130 cromo Integrated 10mm dropouts using invest cast technology Butted, fluted and tapered legs Embossed logo at bottom of fork legs and inside of dropout Angled fork leg ends for grind clearance Internal and externally machined 1pc steerer tube with integrated bearing race 7075-T6 top cap with sunken 6mm allen bolt for 'hollow' look ED rust proof coated before painting 31.09mm offset 2.02 lbs / 920 g